Home		Network		Site Map
		Isolation Transformer
		IT SERIES
		1 kVA To 1000 kVA
		Transformer  is  the  device which  will step up or step down the voltage
		without  altering  the frequency. Transformer  are made in different type
		to  name a  few  Auto  type, Isolation  Type,  Isolation type with shield
		winding   Ultra  isolation,  K  rated  and  so on  as  per  the application
		requirement.
		An Auto type transformer is the one  which  is of one winding running in
		series but separated on the same as primary and secondary as per the
		requirements  of the subjected  input and output voltages  requirements
		which is cost  effective  and  has a serious  problem  of  passing all the
		noise  to  the load  and  damages the electronic circuitry. Hence this is
		not  widely  used in most of the applications.
		An isolation transformer is a device which is used to decouple two circuits, the load connected to this Isolation transformer and to the
		input supply. Isolation  transformer  suppresses  electrical  noises  which  occur  in the Transmission line, because of the other loads
		connected in parallel. An  isolation  transformer  block  transmission  of  DC signals  from one Circuit to other but allows AC signal to
		transmit, it also prevent interference caused by ground lope.
		There  are  two  types  of  noises  which  affect  the  load,  one  is  the Common  mode noise  and  the other is  Normal  mode  noise
		(Transverse mode noises). Common  mode noise happens between  ground and line conductors. Normal mode noise occurs between
		Neutral to line conductors. This noise is the most dangerous and destructive one.
		TECHNICAL SPECIFICATIONS														POWER PROBLEMS
		Advantages Of Isolation Transformer :
			Isolate primary winding and secondary windings.
			Provides isolated neutral.
			It protects micro processor based equipment from dangerous noises and reduces drive failures.
			It can be useful where machine earth can’t be used.
			By Providing Delta star isolation transformer, where  there is problem  of earth  or neutral in the input side is  taken care for the
			safety operation of the load by this Isolation transformer.
			It arrest the noises of high frequency  and noises generated by the usage of high current MCB,ACB, Induction furnace or other
			electromagnetic noises.
			AIRKOM ELETRONICS PVT. LTD - AN ISO 9001:2008 CERTIFIED ORGANISATION.